These days, the emergency lights are not dedicatedly designed only to guide heavy traffic zones. They are structured to do much more in an emergency situation with the improved technology. Without burning out, LED lights are highly energy efficient and can last longer than expected.
They can easily be used without any issues for a longer period of time as they do not take all the energy out of the battery of the vehicle. When required, LED lights can be configured into ELD traffic adviser as they come in many forms.
To bring the situation under control, LED light bars are very multi-functional and can be used for a number of emergency situations. Communicating effectively with the public is a necessity to avoid confusions and resolving the traffic issues it helps in the emergency situations.
When there is an emergency, having this light can double up as LED traffic adviser. Since they have the inbuilt arrows which can specifically direct traffic to take safer routes, traffic advisers have the capacity to direct the traffic in emergency zones.
How these lights help?
For increasing the visual patterns and grabbing the attention of the vehicles from a long distance, the light bars can be pre-programmed to blink in many patterns. To suit the needs of a number of vehicles, light bars can come in different colored LED bulbs and different sizes.
The larger LED light bars are permanently fixed to the vehicles and they are wired to the electric circuit of the vehicles for their power requirements.
Since they have greater visibility even during the day time, larger light bars are the most effective as LED traffic advisers, for maximum effectiveness, the traffic adviser light bars should be mounted on the roof of the vehicles. Over the stands on the rear of vehicles some of the larger models can be seen mounted where they can direct the traffic and act as auxiliary signals. To flash simple words across the small screen area and advising the traffic of an emergency, the traffic advisers can be programmed in this way.
As LED traffic adviser which can be hand-held, smaller LED light bars or even a dash light can be used. Since they are not bulky and do not emit heat, these can be used even inside of the vehicles. When the weather conditions are poor or when the traffic signals fail, these are very effective.
Even in the coldest of weather, all light bars are lightweight and can be handled without a problem. Penetrating the fog, rain, snow and all other weather conditions, the LED bulbs emits beams.
Being the most important function of a traffic adviser is the use of multiple colors for getting the attention of other drivers on the roads. So that the security personnel can work better to resolve issues, it helps in diverting traffic away from emergency zones.
Since they can guarantee the performance of the lights, LED lights should have certain specifications according to the law which should be followed diligently and even buying traffic advisers from licensed vendors is also important as they can guarantee the performance of the lights.
The usage and features of LED Light bars
For emergency vehicle lighting, there are several types of light bars LED which can be used. Mounting on the outer edge, facing the rear, upper exterior mounting, etc. are the options which are included.
Under the adverse conditions, these bars come with super bright LEDs which can provide high intensity beams under low temperature.
Enhancing their usability and reliability, low power operation preserves energy, especially on the highways or during traffic jams, the light bars come with some excellent features.
For the manufacture of light bar used by the modern patrol cars, a lot of improvisation and research has gone into it. Along with aerial reflectors, cop vehicles uses light bars, helicopters can provide additional security from the top which requires aerial visibility to spot the cop vehicles in complete darkness.
Also in the directions if required, there are some simulated systems which can project light both in upward and other directions.
The modules of LED light bars
For the fleets of cop vans which are the part of the same expedition, or operation, the uses of the light bar are even more significant. Servicing these bars is very easy in spite of their extensive functionality. Servicing these bars are very easy, they also come with control boxes which have simple circuits.
If required, the LED modules can also be replaced. To operate for thousands of hours and the simple cigarette plug switch which can be used to turn them on and off whenever required, LEDs used in the light bars are designed to operate for thousands of hours.
To alter the flash patterns depending on the signal which could be sent out to others following the light bar flashes, in case of emergency lighting.
For enhancing the visibility of the light chrome reflectors are used in light bar along with colored lenses. For sending alarms or cautionary messages, red light can be viewed for extremely far away and hence its use is significant in emergency situations.
The maintenance is extremely easy as they can be installed very quickly and easily. In construction vehicles carrying heavy equipment and two trucks which require flashing warning to normal passenger vehicles on the highways, the use of light bars is also seen in construction vehicles.
They are extremely reliable and easy to install as these lights are similar to grille and directional lights. It is sturdy and resistant to harsh weather which helps in using them at all times when it comes to the casing of these lights which is usually a thermoplastic.
LED is usually the best option because of the cost effectiveness as well as the preservation of energy when it comes to the purchase of these lights. To enhance the functionality of these light bars, several different types of lenses such as 8 degree, 15 degree, 30 and 60 degree colored lenses can be used.